2N M2M Solution 2N SmartCom - User Manual 1.9.0 - Manual (Page 110)

110
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Enter the command to display the current server version: x.x.x.x.x
at+gmi
Enter the command to display the device manufacturer – 2N Telekomunikace
®
a.s.
at+gmm
Enter the command to display the device model – AT API. 2N SmartCOM
®
at+gmr
Enter the command to display the current server version: x.x.x.x.x
at+gsn
Enter the command to display the GSM module IMEI.
atz
Enter the command to log out the current user and terminate the TCP
connection.
Server Settings
at^sccfg?
Enter the command to read out and display the current server settings.
^SCCFG: "LISTEN PORT",50505
^SCCFG: "HTTP PORT",93
^SCCFG: "HTTP ENABLED",1
^SCCFG: "AT API PORT",1562
^SCCFG: "AT API ENABLED",1
^SCCFG: "LOG LEVEL",3
^SCCFG: "MAX USER TCP CONNECTIONS",100
^SCCFG: "MAX TERMINAL TCP CONNECTIONS",100
^SCCFG: "KEEPALIVE TIMEOUT",60
^SCCFG: "KEEPALIVE SENDING PERIOD",180
^SCCFG: "TERMINAL FW URL","http://$(SERVER_IP):93/firmware/1.4.0.4.2.bin"
at^sccfg="listen_port",1560
Enter the command to set the server listening port to 1560.
at^sccfg="http_port",8080
Enter the command to set the web server http port to 8080.
at^sccfg="http_enabled",1