2N M2M Solution 2N SmartCom - User Manual 1.9.0 - Manual (Page 6)

6
2N TELEKOMUNIKACE a.s., www.2n.cz
®
1.1 Product Description
The GPRS communication unit is a new product developed and 2N SmartCOM
®
manufactured to provide the maximum utility value, quality and reliability. We hope
you will be fully satisfied with the for a long time. Use 2N SmartCOM
®
2N
®
in accordance herewith for the purposes it was designed and SmartCOM
manufactured for.
is designed for Internet connection via the GPRS network and data 2N SmartCOM
®
retransmission from peripherals connected to RS 232/485/M–Bus via the IP protocol
and GPRS network to a data requesting server or device. Two relay outputs can be
controlled and switched and parameters can be measured on two galvanically
connected inputs.
Safety Precautions
Do not switch on in the vicinity of medical apparatuses to 2N SmartCOM
®
avoid interference. The minimum distance of the antenna and pacemakers should
be 0.5m at least.
Do not switch aboard a plane. 2N SmartCOM
®
Do not switch near petrol stations, chemical facilities or 2N SmartCOM
®
sites where explosives are used.
Any mobile telephone use prohibition based on RF energy radiation applies
to too. 2N SmartCOM
®
may disturb the function of TV sets, radio sets and PCs. 2N SmartCOM
®
Warning! contains components that can be swallowed by 2N SmartCOM
®
small children (SIM card, antenna, etc.).
Never exceed the voltage value specified on the adapter. Check the available
voltage range before connecting to a different power supply. 2N SmartCOM
®
When comes to the end of its operational life, dispose of it 2N SmartCOM
®
in accordance with applicable regulations.
is equipped with an external antenna connector. The 2N SmartCOM
®
antenna has to be located indoors for safety reasons.