Rockwell Automation 1336T PLC Comm. Adapter, Series B, FRN 2.xx-3.xx - Manual (Page 10)

P–2
Publication 1336 FORCE–5.13 –– September, 1998
This manual:
•
provides planning, installation, and wiring information for the
PLC Communications Adapter Board
•
explains the procedures you need to mount and configure your
PLC Communications Adapter Board
•
describes the available parameters and block transfer instructions
•
provides information to help you troubleshoot your PLC
Communications Adapter Board
Contents of this Manual
This manual contains the following information:
Chapter: Title: Contents:
Preface
Describes the purpose, background, and scope of this
manual as well as an overview of this product.
1
Installing and
Wiring Your PLC
Communications
Adapter Board
Provides procedures for installing and wiring your PLC
Communications Adapter Board.
2 Starting Up Provides information for starting up your system.
3
Using RIO
Communications
Provides information about using RIO communications
with the PLC Communications Adapter Board. This
chapter includes sections on redundant RIO mode and
RIO scanner mode.
4
Using DH+
Communications Provides information about using DH+ communications
with the PLC Communications Adapter Board.
5
Understanding the
Resources of Your
Drive
Provides an overview of the function block software and
the available system resources.
6 Parameters
Provides information about the parameters that are
specific to the PLC Communications Adapter Board.
7
Block Transfer
Services Provides information about the block transfer
instructions.
8 Troubleshooting
Explains how to interpret and correct problems with
your PLC Communications Adapter Board.
9
Using the Trending
Features Provides step–by–step instructions for using trending
for diagnostic purposes.
10
Specifications and
Supplemental
Information Provides specifications and supplemental information
including a parameter cross reference by number and
name and a chart of the DIP switch settings.
Purpose of this Manual