Rockwell Automation 1336T PLC Comm. Adapter, Series B, FRN 2.xx-3.xx - Manual (Page 111)

6–21
Publication 1336 FORCE–5.13 –– September, 1998
342 Analog Input 4
[Analog In 4]
Analog In 4 displays the result of converting a
±
10V
signal to a
±
32767 value using Analog In 4 Scale
(parameter 399) and Analog In 4 Offset (parameter
398). You can link this digital value to other 1336
FORCE parameters.
Parameter Number 342
Parameter Type Read Only, Source
Display Units / Drive Units None
Factory Default 0
Minimum Value –32767
Maximum Value +32767
File – Group Communications I/O – Analog Input
343 Data Output A1
[Data Out A1]
Data Out A1 contains the first image word from the
SCANport input image table.
Parameter Number 343
Parameter Type Read/Write, Sink
Display Units / Drive Units None
Factory Default 0
Minimum Value –32767
Maximum Value +32767
File – Group Communications I/O – SCANport I/O
344 Data Output A2
[Data Out A2]
Data Out A2 contains the second image word from
the SCANport input image table.
Parameter Number 344
Parameter Type Read/Write, Sink
Display Units / Drive Units None
Factory Default 0
Minimum Value –32767
Maximum Value +32767
File – Group Communications I/O – SCANport I/O
345 Data Output B1
[Data Out B1]
Data Out B1 contains the third image word from the
SCANport input image table.
Parameter Number 345
Parameter Type Read/Write, Sink
Display Units / Drive Units None
Factory Default 0
Minimum Value –32767
Maximum Value +32767
File – Group Communications I/O – SCANport I/O
346 Data Output B2
[Data Out B2]
Data Out B2 contains the fourth image word from
the SCANport input image table.
Parameter Number 346
Parameter Type Read/Write, Sink
Display Units / Drive Units None
Factory Default 0
Minimum Value –32767
Maximum Value +32767
File – Group Communications I/O – SCANport I/O
347 Data Output C1
[Data Out C1]
Data Out C1 contains the fifth image word from the
SCANport input image table.
Parameter Number 347
Parameter Type Read/Write, Sink
Display Units / Drive Units None
Factory Default 0
Minimum Value –32767
Maximum Value +32767
File – Group Communications I/O – SCANport I/O