Rockwell Automation 1336T PLC Comm. Adapter, Series B, FRN 2.xx-3.xx - Manual (Page 75)

Chapter
5
Publication 1336 FORCE–5.13 –– September, 1998
Understanding the Resources
of Your Drive
Chapter 5 provides information about using the resources that are
available with your drive. The following topics are covered in this
chapter:
•
understanding the SCANport logic control and operation
•
understanding function blocks
•
using system resources
You can make some changes to the default configuration to
customize the way SCANport works for you. This section covers the
following topics:
•
understanding the logic command parameter
•
configuring the SCANport controls
•
setting the loss of communications fault
•
viewing the SCANport faults and warnings
•
using the SCANport image
•
setting the analog I/O parameters
Understanding the Logic Command Parameter
The Logic Command parameter (parameter 52) on the 1336 FORCE
is modified by receiving input from ChA Logic Cmd In, ChB Logic
Cmd In, and SCANport devices 1 through 5 on the PLC
Communications Adapter Board. To use these parameters
effectively, you need to understand how the Logic Command
parameter works.
Chapter Objectives
Using the SCANport
Capabilities