Rockwell Automation 1336T PLC Comm. Adapter, Series B, FRN 2.xx-3.xx - Manual (Page 127)

6–37
Publication 1336 FORCE–5.13 –– September, 1998
416 SCANport Default Reference
[SP Default Ref]
SP Default Ref defines the default reference to be
used when the drive is powered up. You can
change the value of this parameter, but the change
is only accessed when the drive is powered up.
Parameter Number 416
Parameter Type Read/Write, Non–Linkable Sink
Display Units / Drive Units None
Factory Default 2
Minimum Value 1
Maximum Value 7
File – Group Velocity Torque – Velocity Ref
Enums Bit 1 = Xref1 Bit 2 = Preset1 Bit 3 = Preset2 Bit 4 = Preset3
Bit 5 = Preset4 Bit 6 = Preset5 Bit 7 = Xref2