Rockwell Automation 1336T PLC Comm. Adapter, Series B, FRN 2.xx-3.xx - Manual (Page 99)

6–9
Publication 1336 FORCE–5.13 –– September, 1998
File 4 – Diagnostics
➀
Monitor Testpoints Fault Sel/Sts Motor Overload
Filt Vel Fdbk 269 Vel Fdbk TP Sel 145 ChA Flt Sts 436 Mtr Overload Lim 92
Scaled Vel Fdbk 147 Vel Fdbk TP Low 143 ChA Warn Sts 437 Mtr Overld Spd 1 95
Int Torque Ref 167 Vel Fdbk TP Hi 144 ChB Flt Sts 438 Mtr Overld Spd 2 96
Internal Iq Ref 168 Vel Reg TP Sel 137 ChB Warn Sts 439 Min Overload Lmt 97
Computed Power 182 Vel Reg TP Low 135 SP Fault Sts 442 Service Factor 94
DC Bus Voltage 268 Vel Reg TP Hi 136 SP Warn Sts 443
Motor Volt Fdbk 265 Vel Ref TP Sel 110 SP Fault Sel 440
Motor Curr Fdbk 264 Vel Ref TP Low 108 SP Warn Sel 441
Freq Command 266 Vel Ref TP Hi 109 ChA Flt Sel 425
Inv Temp Fdbk 270 Auto Tune TP Sel 47 ChB Flt Sel 430
Torq Mode Stat 184 Auto Tune TP Data 48 ChA Warn Sel 426
Lim Motor Flux 271 Logic Tstpt Sel 71 ChB Warn Sel 431
Enc Pos Fdbk Low 148 Logic Tstpt Data 70 CP Flt Status 82
Enc Pos Fdbk Hi 149 Fault TP Sel 99 VP Flt Status 83
MCB Counter 8 Fault TP 98 CP Warn Status 84
Torq Ref TP Sel 173 VP Warn Status 85
Torque Ref TP 172 CP Flt/Warn Cfg 86
Torq TP Sel 1 273 CP Warn/None Cfg 87
Torq TP Data 1 274 VP Flt/Warn Cfg 88
VP Warn/None Cfg 89
Nofig Flt Status 81
Pwrup Flt Status 80
Max DB Power 77
Max DB Temp 78
DB Time Const 79
➀
Descriptions of the shaded parameters are located in the 1336 FORCE user manual.