Rockwell Automation 2755 AdaptaScan Software - Manual (Page 12)

1–2 Installation
Publication 2755-838
This section shows how to install the AdaptaScan Configuration
software.
To install the AdaptaScan Configuration software:
1. Insert the AdaptaScan disk #1 in the appropriate floppy disk
drive.
2. In the Program Manager window, choose Run from the File
menu.
The Run dialog opens.
3. In the command line box, type the drive letter of the drive
containing the AdaptaScan diskette followed by a colon and the
word setup.
For example, type a:setup
Then click OK or press ENTER.
The installation begins. You are prompted to continue or exit the
installation.
Installing AdaptaScan
Software