Rockwell Automation 2755 AdaptaScan Software - Manual (Page 177)

12–5
Publication 2755-838
The following shows how data is uploaded from a Reader to the
AdaptaScan Software.
1. Open or create the project in which you want to upload the
Reader configuration.
2. Make sure the configuration cable is connected to the scanner
programming port. Note: You can also transfer files using a
DeviceNet network connection to your computer (refer to page
2–18).
3. From the Communications menu, select Go-Online.
The Reader will be detected (if properly connected) and displayed
in the project window.
Note: If you go on-line with a new project and the project
window doesn’t display any devices, check the query preferences
as described on page 2–19.
Uploading a Configuration