Rockwell Automation 2755 AdaptaScan Software - Manual (Page 141)

10–4
Publication 2755-838
From the Message dialog, you configure the content and format of
bar code messages sent to the host.
Open the Message dialog by selecting the Message button on the
main Project dialog.
Note: If Triggered By is not
enabled, data will not be transmitted
to a host.
Field Definitions
Displays a list of defined message fields. Initially, the Field
Definitions area is blank.
Select To
New Open the Message Field dialog allowing you to create a new message
field.
Edit Open the Message Field dialog for the highlighted message field.
Cut Cut the highlighted message field to the clipboard.
Paste Move the message field from the clipboard to Field Definitions listing.
Select Paste to make copies of the field.
Defining Messages