Rockwell Automation 2755 AdaptaScan Software - Manual (Page 49)

4–2 Getting Started
Publication 2755-838
The sample configuration requires the following items. The
Dataliner
t DL10 and cable are optional. The DL10 is a slave
message display that displays any ASCII data that it receives from
the Reader. You can use the configuration software monitor function
to view decoded data if a DL10 or other display device is
unavailable.
Personal Computer
Running Windows 95 or Windows NT
AdaptaScan Bar Code Reader
(Catalog No. 2755-SN3, -SN5, -SN8)
Configuration Cable
(Catalog No. 2755-NC48 Series B Reader,
2755-NC43 Series A Reader)
AdaptaScan Software
(Catalog No. 2755-ASN)
9-to-25 Pin Adapter
Required for Computers with
25 Pin Communication Port.
(Purchase Locally)
Test Bar Code Symbols
(Publication No. 2755-940)
Provided with this Manual
Power Supply
(Catalog No. 2755-PW46, -PW47)
Wire & Small Slotted Screwdriver
For Connecting Power Supply
AdaptaScan Wiring Base
(Catalog No. 2755-NB40, -NB41)
DL10 Communication Cable
2 Conductor Shielded Cable
(Belden 8303 or Equivalent)
Dataliner
(DL10 with
120V Power Cord)
Optional Items
What You Need