Rockwell Automation 2755 AdaptaScan Software - Manual (Page 170)

11–18
Publication 2755-838
The Package Counter dialog configures the operation of the package
counter. The package counter increments each time decoded
symbols match the match table definition for the package. Open the
Package Counter dialog by selecting the Counter button on the
Package dialog.
Count Direction
Determines whether the counter value increments or decrements
each time a package is read.
Select: To:
Up Increment the counter value by 1 each time a package is read.
Down Decrement the counter value by 1 each time a package is read.
Initial Value
Specifies the initial value loaded in the counter. The initial value is
loaded the first time the application runs or when power is cycled to
the Reader.
Rollover Value
Specifies the value at which the counter resets to the initial value.
For example if the reset value is 5, the counter would increment 0,1,
2, 3, 4, 5, 0, 1, 2, 3, 4, 5, 0, 1, 2, ...
Configuring the
Package Counter