Rockwell Automation 2755 AdaptaScan Software - Manual (Page 131)

9–10
Publication 2755-838
The Input Timer 1 and 2 function like the Package Detect with an
additional timer except they are triggered by another source. Open
this dialog by selecting Input Timer 1 or 2 from the list on the Input
& Output dialog and clicking the Edit button.
Timer Name
Specifies a unique name for the timer. This name appears in lists
where an input timer trigger can be assigned.
Triggered By
Specifies the trigger source that will initiate the input timer. The
trigger is defined by the Reader name and input name.
Device
Specifies the device that is the source of the trigger. The trigger may
be from the current Reader or any other Reader on the same network.
Input
The following selections are available as trigger input options.
Select: To:
Timer Use the internal Reader timer as the trigger source.
ASCII
Command Use an ASCII command input 1 or 2 as the trigger source.
Input Timer Use Input Timer 1 or 2 on another Reader as the trigger
source.
DeviceNet
Input Use a DeviceNet input as the trigger source. See page 9–13.
Package Detect Use an external package detect as the trigger source.
[Decoder] Use the decode trigger as the trigger source.
[Match Table] Use the match table trigger as the trigger source.
[Package] Use the package trigger as the trigger source.
[Message] Use the message trigger as the trigger source.
Configuring the
Input Timers 1 and 2
☞
Or double-click on an
Input Timer to open the dialog.