Rockwell Automation 2755 AdaptaScan Software - Manual (Page 160)

11–8
Publication 2755-838
Triggered By
Specifies when the Reader activates an output based on the results of
the match table. Items that appear in brackets specify the same
trigger assigned to the specified function. For example selecting
[Decoder] indicates that the match table uses the same trigger
assigned to the decoding function.
Select: To:
Device Specify the Reader that is the source of the trigger.
Input Specify the input used to provide the timing of a match table
output.
The following selections are typical trigger inputs.
Select: To:
Package Detect Use the package detect input as the trigger source.
Timer Use the internal Reader timer as the trigger source.
ASCII
Command Use an ASCII command as the trigger source.
[Decoder] Use the decode trigger as the trigger source.
[Package] Use the package trigger as the trigger source.
[Message] Use the message trigger as the trigger source.
[Match Table] Use the match table on another Reader as the trigger source.