Rockwell Automation 2755 AdaptaScan Software - Manual (Page 65)

4–18 Getting Started
Publication 2755-838
The label setup defined for Bar Code Reader 1 is displayed in the
Bar Code Labels & Symbols box.
Select the UPC-A
Label Setup
5. Select UPC–A from the Bar Code Labels & Symbols box.
6. If you want the Reader to match a specific label, enter the symbol
data as the Rule.
7. Click the Outputs button to specify which output to activate
when a match occurs.
The Match Function Output dialog opens.
8. From the Available Outputs: list, select Discrete Input/Output 1
and then click the Add >> button.
The Output To: list shows that Discrete Input/Output 1 is assigned
to the match function.
9. Click OK to return to the Match Function dialog.
10. Click OK to return to the Match Table dialog.
You have completed the configuration of the match table.
☞ Or double-click an available
output to add it to the list
of outputs.