Rockwell Automation 2755 AdaptaScan Software - Manual (Page 23)

2–5 Working with Projects
Publication 2755-838
Existing Configurations
Any existing Reader configurations within the project are displayed
in the project window:
This display shows:
•
Name - Reader name as specified on the Device dialog.
AdaptaScan software provides a default name of Bar Code
Reader 1, Bar Code Reader 2, etc.
•
Device Name - read only field that displays the internally
configured name of the DeviceNet device (typically the catalog
number).
•
Network ID - the node address of the device on the DeviceNet
network
Note: When you go on-line with the software, any devices that are
not part of the configuration but are present on the network will be
added to the display. Refer to Chapter 3 for a description of the
on-line functions.