Rockwell Automation 2755 AdaptaScan Software - Manual (Page 70)

4–23 Getting Started
Publication 2755-838
This section shows how to configure the Reader to send bar code
data out the RS-232 port to the Dataliner message display.
1. From the Project 1 window, click the Message button.
The Message dialog opens. Make the following edits:
1. Select Enable
2. Select Timer
2. Click the New button.
The Message Field dialog opens. Make the following edits:
1. Select Bar
Code Reader 1
2. Select UPC–A
Symbol
3. Leave blank
4. Check Match
Exactly box 5. Make sure Disable
is not selected
Note: If you leave the Find String blank and select Match Exactly,
all characters will be matched.
Configuring
Message Output