Setting the timer – Rockwell Automation 2755 AdaptaScan Software User Manual
Page 68
Advertising
4–21
Getting Started
Publication 2755-838
This section configures the timer that was selected as the trigger
source for decoding and scanning.
1. From the Project 1 window, click the Input/Output button.
The Input & Output dialog opens.
Select Timer
2. Select Timer and then click the Edit button.
The Timer dialog opens with a default timer name of Timer.
Cyclic Timer
On 1 Second
Off 1 Second
The dialog shows that the timer is set for cyclic operation, with a
specified On Time and Off Time.
3. Click OK to exit and return to the Input & Output dialog.
4. Click Save and then Close to save the timer definition.
You return to the Project 1 window.
Setting the Timer
☞
Or double-click on Timer to
open the Timer dialog.
Advertising