Rockwell Automation 2755 AdaptaScan Software User Manual
Page 179
12–7
Publication 2755-838
7. You can modify the uploaded configuration as required and then
download the configuration again.
Uploading Interconnected Readers
When a Reader configuration is uploaded that has interconnections
with other Readers, a dialog will be displayed asking whether or not
the connections should be recreated in the project.
If you select to recreate the connections, one of the following will
occur depending on whether or not the interconnected Reader
configuration exists in the project:
•
If the interconnected Reader is in the database, the
interconnections between the Readers will be merged.
•
If the interconnected Reader is not in the database, a default
Reader configuration will be added beginning with the name
Incomplete. The uploaded interconnections are then saved using
the newly created configuration.
If you select to maintain the interconnections and an uploaded
default Reader configuration is added in which there is a conflict
with an existing interconnection, you will be prompted to choose
between the uploaded connection or the existing connection.
If you select to keep the existing connection (not the uploaded
connection), the uploaded Reader configuration name will be
changed to begin with Incomplete and the uploaded connection
information is deleted.
If you select not to recreate the connections, the uploaded Reader
configuration will be added to the project with a name beginning
with Incomplete and the uploaded connection information is deleted.