Rockwell Automation 2755 AdaptaScan Software - Manual (Page 180)

Chapter
13
Printing a Project
This chapter describes how to print a project.
Section Page
Setting Up a Printer 13–1
Printing a Project 13–2
Sending a Project to a File 13–4
Printout Contents 13–6
To print a project, a printer must be connected to your computer and
your computer must recognize the printer as a valid printer. See your
Windows User’s Guide for details on installing print drivers.
To set up the printer:
1. Choose Print Setup from the File menu.
The standard Print Setup dialog opens.
2. Select attributes for your printer.
3. Click the Options button to enter options specific to your printer.
The Options dialog is different for each printer type.
4. When done, click OK. Or click Cancel to exit the dialog without
saving changes.
If your printer is not listed:
1. Check for hardware compatibility between your printer and one
of the printers listed.
2. Check if your printer has an emulation mode that is compatible
with one of the printers listed.
3. You may need to install a print driver for your printer. Refer to
the Microsoft Windows User’s Guide.
Chapter Objectives
Setting up a Printer