Rockwell Automation 2755 AdaptaScan Software - Manual (Page 87)

6–5
Publication 2755-838
The Bar Code Label dialog specifies the symbols allowed on a bar
code label and other label parameters. Open this dialog by selecting
the New or Edit button on the Bar Code Label dialog.
Opens the
Symbologies Dialog
Label Name
Specifies a unique name (up to 250 alphanumeric characters
including spaces) for the label definition. The name appears in the
Decoder dialog allowing you to assign the label to a Reader.
Symbols Per Scan
Specifies the number of bar code symbols the Reader must read in a
single scan (single left - right movement of the scan beam).
Select: To:
1 Read a single bar code symbol in each scan.
2 - 6 Read up to 6 bar code symbols within a single scan.
Any Read labels where the number (from 1 to 6) or location of bar
code symbols varies or is unknown.
The symbols within a label must be unique.
Identical symbols on separate scans are seen as
duplicates; the second symbol is ignored.
Defining a Bar Code Label