Rockwell Automation 2755 AdaptaScan Software - Manual (Page 164)

11–12
Publication 2755-838
The Match Entry Counter dialog configures the match entry counter.
The match entry counter increments each time decoded symbols
match the data entered in the match table. Open the Match Entry
Counter dialog by selecting the Counter button on the Match
Function dialog.
Count Direction
Determines whether the counter value increments or decrements
each time a match occurs.
Select: To:
Up Increment the counter value by 1 each time a match occurs.
Down Decrement the counter value by 1 each time a match occurs.
Initial Value
Specifies the initial value loaded into the counter. The initial value is
loaded into the counter the first time the application is run or when
power is cycled to the Reader.
Rollover Value
Specifies the value at which the counter resets to the initial value.
For example if the rollover value is 5, the counter would count: 0, 1,
2, 3, 4, 5, 0, 1, 2, . . .
Configuring the
Match Entry Counter