Rockwell Automation 2755 AdaptaScan Software - Manual (Page 126)

9–5
Publication 2755-838
From the Input & Output dialog you select and configure the
operation of the Reader’s input and output devices. Open this dialog
by selecting the Input/Output button on the main Project dialog.
Inputs and Outputs
Displays a listing of the inputs and outputs available to the Reader.
Items that appear with a check mark are in use.
Select: To:
Package Detect Define the package detect input.
Discrete Input/Output 1 Define the operation of the I/O module installed in position # 1
of the wiring base.
Discrete Input/Output 2 Define the operation of the I/O module installed in position # 2
of the wiring base.
Timer Define the operation of the Reader’s internal timer.
ASCII Command
Input 1 or 2 Define the ASCII strings that a host can send as ASCII com-
mand 1 or 2. Each command contains both a trigger on and
trigger off ASCII string.
Input Timer 1 or 2 Define the input timers. Input timers function like a timer but
are triggered from another source.
DeviceNet Input
1 to 7 Define the discrete DeviceNet inputs available when communi-
cating with other devices through a DeviceNet scanner module.
DeviceNet Output
1 to 15 Define the discrete DeviceNet outputs available when commu-
nicating with other devices through a DeviceNet scanner mod-
ule.
Select the Edit button to open the dialog corresponding to the
highlighted input or output.
Used By
Opens the Used By dialog for the highlighted input or output. The
Used By dialog displays other Reader configurations using the same
input or output.
Use As
Specifies whether a discrete input or output module is going to
occupy the position in the wiring base.
Selecting Inputs and Outputs
☞
Or double-click an input or
output in the Inputs & Outputs
dialog to open the
corresponding dialog.