Rockwell Automation 2755 AdaptaScan Software - Manual (Page 94)

6–12
Publication 2755-838
Interleaved 2 of 5
Open the Interleaved 2 of 5 dialog by highlighting Interleaved 2 of 5
in the Symbologies dialog and then selecting the Edit button.
Check Character
Select: To:
None Handle all decoded characters as data.
Verify Verify the check character on each symbol that is read. The
symbol is invalid if the calculated code (modulus 43 sum of all
character values) does not match the decoded check character.
Verify & Strip Verify the check character on each symbol and then remove
the check character from the data. The symbol is invalid if the
calculated code does not match the decoded check character.
Guard Bars
Verifies the presence of guard bars. When selected, the guard bars
must be present to decode a symbol. When not selected, the symbol
is decoded with or without guard bars.
Enable 2 Character Codes
Allows reading of Interleaved 2 of 5 symbols consisting of only 2
characters. The Reader will ignore 2 character symbols unless this
box is selected.
Note: Do not enable 2 character codes unless you are reading 2
character codes. Otherwise, a partial scan of symbols could result in
a valid short read.
☞
Or double-click on a
symbology in the Symbologies
box to open the dialog.