Rockwell Automation 2755 AdaptaScan Software - Manual (Page 158)

11–6
Publication 2755-838
Here is an example of an Auto-Load using a push button as the
trigger source.
Match Table
Match Table
Function = Auto-Load
Rule =
➀ The match table function is set for Auto-Load.
➁ Auto-Load is triggered by operator prior to Package
Detect trigger (both Package Detect and Auto-Load
triggers required). Auto-Load trigger is maintained (but-
ton pressed) while the Reader scans the label data.
➂ Auto-Load trigger is turned off (operator releases
button). The decoded bar code data is entered into
the match table definition.
Function = Match Entry
Rule = 016759089
④ Scan the same label again. Verify that the correct
data was entered into the match table by observ-
ing the output assigned to the match table.