Rockwell Automation 2755 AdaptaScan Software - Manual (Page 128)

9–7
Publication 2755-838
Timing
Sets the signal duration and cycling after an input is detected. Time
is specified in milliseconds (0 to 32,767).
Select: To:
On & Off Delay Specify a delay that occurs when an input signal changes
state. After an input changes state, the Reader maintains the
current state for the On & Off delay period before recognizing
the new state.
Minimum
On Time Specify the minimum amount of time that an input remains
active. If an input is on for a shorter duration than the time
entered, the input duration is lengthened. Enter a value (0 to
32,767).
Maximum
On Time Specify the maximum amount of time that an input remains
active. If an input is on for a longer duration than the time en-
tered, the input duration is shortened. Enter a value (0 to
32,767).
Cyclic Operation
Turns the input on and off for set periods while the input is active.
Select: To:
Enable Enable or disable cyclic operation.
On Time Specify the amount of time in milliseconds that the input is on
during a cycle. Enter 0 to 32,767.
Off Time Specify the amount of time in milliseconds that the input is off
during a cycle. Enter a value from 0 to 32,767.
Limits
Specifies minimum and maximum on times for the package detect or
discrete input.
Select: To:
Min Enter the minimum amount of time (in milliseconds) that the
input is on.
Max Enter the maximum amount of time (in milliseconds) that the
input is on.