Rockwell Automation 2755 AdaptaScan Software - Manual (Page 17)

1–7 Installation
Publication 2755-838
3. From the Communications menu, select Go-Online.
The Reader will be detected (if properly connected) and displayed
in the project window.
Note: The Query dialog may be displayed when you go on-line
(depending on your preference settings). Refer to page 2–19.
4. If the address displayed is not 63, change the Reader address by
clicking the Device button.
The Device dialog opens showing the current address.
If the Device is online but not in the project
database, the following dialog is displayed:
If the Device is online and in the current project
database, the following dialog is displayed:
5. Change the address and click Apply.