Rockwell Automation 2755 AdaptaScan Software - Manual (Page 41)

3–3
Publication 2755-838
When going on-line:
•
You can only be on-line with one project at a time. Use the Go
Off-Line command (Communications menu) when you want to
switch to another project.
•
Upload, Download, Monitor and Compare functions are only
available for AdaptaScan Readers having the same major version
number as the AdaptaScan software (firmware version 11.XX or
greater)
•
The Firmware button, for downloading firmware to a Reader, is
only available when the communications channel is set for
Configuration Port (direct connection using configuration cable).
•
Use Refresh (Communications menu) to query the network and
update the display.
•
Use Query (View menu) to display the Query dialog. The Query
dialog allows you to specify the network addresses read when
on-line functions are used. Refer to page 2–19. By only
checking the addresses that are required, you can increase the
speed at which network operations occur.