Rockwell Automation 2755 AdaptaScan Software - Manual (Page 35)

2–17 Working with Projects
Publication 2755-838
AdaptaScan software creates projects with a default name (Project 1,
Project 2, ...) and a default DeviceNet baud rate of 125K. To rename
a project, enter a project description or change the baud rate, open
the project you want to edit. With the project as the currently active
window, select Edit from the Project menu.
The Project dialog opens.
Enter a new project name and description. Select a baud rate that is
compatible with the DeviceNet network on which the Readers are
communicating.
Entering a Project Name,
Description, and Baud Rate