Rockwell Automation 2098-IPD-xxx Ultra5000 Intelligent Positioning Drives Installation Manual User Manual
Page 114
Publication 2098-IN001E-EN-P — April 2002
B-2
Interconnect Diagrams
Figure B.1
Ultra5000 Motor/Drive Cable Connections
PWR
To
Terminal
Strip
To CN3A or CN3B
To CN2
To CN2
Motor Power Cables
500W, 1 kW, 2 kW Ultra5000 to H-Series Motors
500W, 1 kW, 2 kW Ultra5000 to H-Series Motors
15 kW Ultra5000 to H-Series Motors
15 kW Ultra5000 to H-Series Motors
2 or 3 kW Ultra5000 to H and F-Series Motors
2 or 3 kW Ultra5000 to H and F-Series Motors
7.5 kW Ultra5000 to H and F-Series Motors
7.5 kW Ultra5000 to H and F-Series Motors
15 kW Ultra5000 to H and F-Series Motors
15 kW Ultra5000 to H and F-Series Motors
500W, 1 kW, 2 kW Ultra5000 to MP-Series Motors
2 or 3 kW Ultra5000 to MP-Series Motors
7.5 kW Ultra5000 to MP-Series Motors
500W, 1 kW, 2 kW Ultra5000 to N-Series Motors
500W, 1 kW, 2 kW Ultra5000 to N-Series Motors
500W, 1 kW, 2 kW Ultra5000 to Y-Series Motors
Feedback Cables
Ultra5000 CN2 port to H-Series Motors, RA
Flying Leads on drive-end to H-Series Motor, RA
Ultra5000 CN2 port to H and F-Series Motors
Flying Leads on drive-end to H and F-Series Motor
Ultra5000 CN2 port to H and F-Series Motors, RA
Ultra5000 CN2 port to H and F-Series Motors, RA, skewed
Ultra5000 CN2 port to MP-Series Motors
Flying Leads on drive-end to MP-Series Motor
Ultra5000 CN2 port to N-Series Motors
Flying leads on drive-end to N-Series Motors
Ultra5000 CN2 port to N-Series Motors, RA
Ultra5000 CN2 port to N-Series Motors, RA, skewed
Ultra5000 CN2 port to N-Series Motors, RA, skewed
Flying leads on drive-end to N-Series Motors, RA, skewed
Flying leads on drive-end to N-Series Motors, RA
Ultra5000 CN2 port to Y-Series Motors
Flying Leads on drive-end to Y-Series Motor
Drive Feedback Cable (CN2) to flying leads, straight
Interface Cables and Kits
Ultra5000 CN2 port drive mounted breakout board
CN2 Breakout Board Kit (see description on
CN2 Breakout Board Cable (see description on
Ultra5000 CN3 port drive mounted breakout board
Ultra5000 CN3 port to personal computer
Standard cable lengths are; 01, 03, 09, 15, 30 meters (3.3, 9.8, 29.5, 49.2, 98.5 ft). Where xx is the length in meters.
is limited to 1, 3, 9 or 15 meters (3.3, 9.8, 29.5, or 49.2 ft).
e.g.,
is a fixed 15 meters (listed as
Ultra5000 CN2 port drive mounted breakout board
under Interface Cables and Kits).
Catalog Number
Catalog Number
Catalog Number
Ultra5000