Rockwell Automation 2098-IPD-xxx Ultra5000 Intelligent Positioning Drives Installation Manual - Manual (Page 43)

Publication 2098-IN001E-EN-P — April 2002
Ultra5000 Connector Information 2-17
I/O Connectors
CN1A (28-pin) and CN1B (14-pin) are plugable, double-row, spring
clamp connectors with 3.5mm spacing. Refer to the tables on page
2-5
for pin-outs.
Motor Encoder Connector
CN2 (15-pin) motor encoder connector is a standard D-shell
connector. Refer to the table on page
2-6 for pin-outs.
Serial Port Connectors
The CN3A (Main) and CN3B (Auxiliary) are standard D-shell
connectors for serial port (9-pin) communications. Refer to the table
on page
2-7 for pin-outs.
Terminal Blocks
The following tables list the connections on the 460V Ultra5000 drives
(3 kW, 5 kW, 10 kW, 15 kW and 22 kW) power (TB1) and the shunt
(TB2) terminal blocks.
Refer to Wiring Power Connections on
page 3-14 for additional information.
IMPORTANT
The 2098-IPD-HVxxx-xx drives can be powered with
230-240 Vrms in order to be used in conjunction with
motors designed for 230V operation. In such cases,
the voltage levels used for shunting and DC bus
overvoltage limits are adjusted to be compatible with
the voltage limit of the motor.