Rockwell Automation 2098-IPD-xxx Ultra5000 Intelligent Positioning Drives Installation Manual - Manual (Page 97)

1
Publication 2098-IN001E-EN-P — April 2002
Appendix
A
Specifications and Dimensions
Objectives
This appendix covers the following topics:
• Ultra5000 Specifications
• Dimensions
Ultra5000 Specifications
The following sections provide specifications for the Ultra5000.
General Power Specifications
2098-IPD-005-xx, -010-xx, and -020-xx
The table below lists general power specifications and requirements
for the Ultra5000 230V drives.
Specification Description
2098-IPD-005,
2098-IPD-005-DN
2098-IPD-010,
2098-IPD-010-DN
2098-IPD-020,
2098-IPD-020-DN
AC Input Voltage
1 100-240V
rms
Single Phase
AC Input Frequency 47 - 63 Hz
AC Input Current
2
Nominal
Maximum inrush (230V ac input)
5A
rms
100A (0-peak)
9A
rms
100A (0-peak)
18A
rms
100A (0-peak)
Output Peak Current 7.5A (0-peak) 15A (0-peak) 30A (0-peak)
Continuous Output Current 2.5A (0-peak) 5A (0-peak) 10A (0-peak)
Energy Absorption Capability
115V ac input
230V ac input
125 Joules
51 Joules
Continuous Power Output
115V ac input
230V ac input
0.25 kW
0.5 kW
0.5 kW
1.0 kW
1.0 kW
2.0 kW
1
Specification is for nominal voltage. The absolute limits are ±10%, or 88-265V
rms
.
2 The 2098-005- xx, -010-xx, and -020-xx (230V) drives are limited to two contactor cycles per minute.