Rockwell Automation 2098-IPD-xxx Ultra5000 Intelligent Positioning Drives Installation Manual User Manual
Page 76
Advertising
![background image](/manuals/580388/76/background.png)
Publication 2098-IN001E-EN-P — April 2002
3-16
Connecting Your Ultra5000
Figure 3.14
CE Clamp Cable Preparation
For these Ultra5000 drives:
The dimension L has
this value:
2098-IPD-005 or -005-DN
2098-IPD-010 or -010-DN
2098-IPD-020 or -020-DN
2098-IPD-030, -030-DN, -HV030, or -HV030-DN
2098-IPD-HV050, or -HV050-DN
2098-IPD-075, or -075-DN
2098-IPD-HV100, or -HV100-DN
185 mm (7.25 in.)
2098-IPD-150, -150-DN, -HV150 or -HV150-DN
2098-IPD-HV220 or -HV220-DN
241 mm (9.50 in.)
W
U
V
L (refer to table below)
12 mm (0.50 in.)
Motor cable
Exposed braid
Advertising