Rockwell Automation 2098-IPD-xxx Ultra5000 Intelligent Positioning Drives Installation Manual - Manual (Page 15)

1
Publication 2098-IN001E-EN-P — April 2002
Chapter
1
Installing Your Ultra5000
Chapter Objectives
This chapter provides system installation guidelines and procedures
for mounting your Ultra5000. This chapter covers the following topics:
• Complying with European Union Directives
• Before Mounting Your System
• Bonding Your System
• Mounting Your Ultra5000 Drive
Complying with European Union Directives
If this product is installed within the European Union or EEC regions
and has the CE mark, the following regulations apply.
Note: Declarations of Conformity (DOCs) to EU Directives are
available on-line at www.ab.com/certification for Motion
Control products. The web site is the authoritative source for
verifying compliance and suitability for use of this and other
Rockwell Automation/Allen-Bradley products.
The web site also provides links to other certification agencies
(UL, CSA, etc.).
ATTENTION
!
The following information is a guideline for proper
installation. The National Electrical Code and any
other governing regional or local codes overrule this
information. The Allen-Bradley Company cannot
assume responsibility for the compliance or the
noncompliance with any code, national, local or
otherwise, for the proper installation of this system
or associated equipment. If you ignore codes during
installation, the hazard of personal injury and/or
equipment damage exists.