Rockwell Automation 2098-IPD-xxx Ultra5000 Intelligent Positioning Drives Installation Manual - Manual (Page 140)

Publication 2098-IN001E-EN-P — April 2002
C-4 Catalog Numbers and Accessories
External Shunt Kits
External shunts are available for use with Ultra5000 drives. Refer
to Related Documentation on page P-3 to locate Installation
Instructions for these shunts.
Use the following tables to identify external shunt kits available for
Ultra5000 drives.
Refer to Ultra5000 Shunt Module Information on
page B-23 for basic wiring guidelines.
If your drive is: You may use this shunt Catalog Number
2098-IPD-005, -005-DN 300 Watt Active Shunt Module
with 300 Watt Active Shunt
Ferrites
2090-UCSR-A300
1
2098-IPD-010, -010-DN
2098-IPD-020, -020-DN
2098-IPD-030, -030-DN 200 Watt Passive Shunt Module 2090-UCSR-P200
2098-IPD-075, -075-DN 900 Watt Passive Shunt Module 2090-UCSR-P900
2098-IPD-150, -150-DN
2098-IPD-HV030, -HV030-DN
2098-IPD-HV050, -HV050-DN 900 Watt 2090 Passive Shunt
Module
2090-SR120-09
2
2098-IPD-HV100, -HV100-DN 900 Watt 2090 Passive Shunt
Module
2090-SR040-09
2
2098-IPD-HV100, -HV100-DN 1800 Watt 2090 Passive Shunt
Module
2090-SR040-18
2
2098-IPD-HV150, -HV150-DN 900 Watt 2090 Passive Shunt
Module
2090-SR025-09
2
2098-IPD-HV150, -HV150-DN 1800 Watt 2090 Passive Shunt
Module
2090-SR025-18
2
2098-IPD-HV220, -HV220-DN 3600 Watt 2090 Passive Shunt
Module
2090-SR020-36
2
1 A 300W Active Shunt may be labelled with the obsolete Catalog Number 1398-SR3AF.
2 Refer to 2090 Series Passive Shunts on page C-5 for general specifications.