Important user information – Rockwell Automation 2098-IPD-xxx Ultra5000 Intelligent Positioning Drives Installation Manual User Manual
Page 2
Important User Information
Because of the variety of uses for the products described in this
publication, those responsible for the application and use of this
control equipment must satisfy themselves that all necessary
steps have been taken to assure that each application and use
meets all performance and safety requirements, including any
applicable laws, regulations, codes and standards.
The illustrations, charts, sample programs and layout examples
shown in this guide are intended solely for purposes of example.
Since there are many variables and requirements associated with
any particular installation, Allen-Bradley
®
does not assume
responsibility or liability (to include intellectual property liability)
for actual use based upon the examples shown in this
publication.
Allen-Bradley publication
, Safety Guidelines for the
Application, Installation and Maintenance of Solid-State Control
(available from your local Allen-Bradley office), describes some
important differences between solid-state equipment and
electromechanical devices that should be taken into
consideration when applying products such as those described
in this publication.
Reproduction of the contents of this copyrighted publication, in
whole or part, without written permission of Rockwell
Automation, is prohibited.
Throughout this manual we use notes to make you aware of
safety considerations:
Attention statements help you to:
• identify a hazard
• avoid a hazard
• recognize the consequences
Allen-Bradley is a registered trademark of Rockwell Automation.
ControlLogix, RSLogix 5000, Ultra5000, and Ultraware are trademarks of Rockwell Automation.
CSA is a registered trademark of Canadian Standards Association.
DeviceNet is a trademark of the Open DeviceNet Vendor Association.
UL and C-UL are registered trademarks of Underwriters Laboratories, Inc.
ATTENTION
!
Identifies information about practices or
circumstances that can lead to personal injury
or death, property damage or economic loss.
IMPORTANT
Identifies information that is critical for
successful application and understanding of the
product.