Rockwell Automation 9307 FactoryTalk EnergyMetrix - Manual (Page 104)

FactoryTalk EnergyMetrix Software
104
Enable ADR in the Device Setup Page
During device setup in FactoryTalk EnergyMetrix software, enable ADR by selecting the
check box. Enter the address of the ADR interface file. The default is 100. If you have
changed the address of the ADR interface file in the ADR Wizard, enter the correct
address.
Specify the Index Value in the Meter Tag Setup
When setting up meter tags, enter the address of the real-time data into the meter tag
Address field, and add the Index value of the corresponding controller address into the
Trend log parameter field and then Save the meter tag setup.