Rockwell Automation 9307 FactoryTalk EnergyMetrix - Manual (Page 89)

4 • Set up Your System Architecture
89
A new window opens containing the navigation tree, meters and meter tags in the
remote server. The objects accessible to you are determined by the username and
password used in setting up the roll-up server device.
3. Drill down to and select a Meter Tag from the remote server.
The new window remains open. Return to the meter tag setup screen. You can keep
the name that is automatically entered or enter a different Name for the meter tag.
Note that the remaining fields are automatically filled in. The log rate value reflects
the log rate of the tag on the remote server. The roll-up meter tags are refreshed at a
rate determined by a setting in the web.config file. The default roll-up interval is 60
minutes.
4. Click Save to save the new tag, or Cancel to exit without saving.
Do not change any of the remaining fields from the values that
FactoryTalk EnergyMetrix software fills in automatically. Changing the address, data
format, scaling, value type, and other parameters may prevent logging of the tag or
may cause the tag to be logged with erroneous data.