Rockwell Automation 9307 FactoryTalk EnergyMetrix - Manual (Page 23)

2 • FactoryTalk EnergyMetrix Web Interface Tour
23
System Configuration
The Configuration page under the System tab provides a means for setting a variety of
program options.
To access the Configuration page, select the System tab and then select the Configuration
item in the navigation tree. Click the Edit button to change settings. You must have Edit
System Configurations privileges to make changes.
Logger Telnet Debugging
 Telnet debugger, enabled or disabled (default)
 Remote debug port, any unused port ID, default 23
 Remote debug password, default "".
Email SMTP Server Configuration
FactoryTalk EnergyMetrix software sends email alarms and reports via a SMTP server
configured by using this page.
 SMTP (Simple Mail Transport Protocol) server name or IP address
 Sender email address (does not need to be an actual email address)
 Test email button - sends a test message to the email address entered in the address
field when the Send button is clicked