Rockwell Automation 9307 FactoryTalk EnergyMetrix - Manual (Page 164)

FactoryTalk EnergyMetrix Software
164
 Min/Max tab
This displays the Min/Max log from the power monitor. Maximum and minimum
values are maintained since the last time the log was reset.
 Time-of-Use tab
This displays the time of use records from the TOU log in the power monitor.
 Load Factor Log Tab (M6 and M8 only)
This displays the load factor log from the power monitor, including load factor results
for real power, reactive power, apparent power, and current for the current and
previous 12 months.
 Setpoints tab
This displays the record of setpoint activity in the power monitor.
 Data tab, Energy tab
These tabs provide links to the power monitor web page where you can download the
data and energy log files.
 Sag/Swell tab (M6 and M8 only)
This displays the sage and swell events from the Event Log against the ITI voltage
tolerance envelope (CBEMA Curve). The duration of the sag or swell event appears
along the x-axis and the setpoint release voltage appears along the y-axis.
The ITI curve shows the events against the base ITIC sag curve, as well as the SEMI
F47-0706 for three phase-to-phase standard. The SEMI F47 sag curve aligns with the
ITIC sag curve except where shown in red.
 Trigger Data tab (M6 and M8 only)
This displays the trigger data log from the power monitor. These data logs are
triggered from either a setpoint or a logic gate output in the M6 or M8 model.
Once a trigger file is selected from the File list tab, then the second tab title gets the
name of the trigger file, and on that tab the basic data from the trigger file will be
displayed.
 Refresh Button
Reads new values from the power monitor.
To copy the currently displayed log into an application such as
Microsoft Excel, click in the log display window with the mouse.
Press <Ctrl> A then <Ctrl> C to copy the log, then paste the
copied data into the application.