Rockwell Automation 9307 FactoryTalk EnergyMetrix - Manual (Page 24)

FactoryTalk EnergyMetrix Software
24
Logger Configuration
 Derived tag delay - specifies how long after meter data is polled that derived tags are
calculated. Default is 5 minutes
 Maximum active DTL operations - specifies the maximum concurrent messages with
RSLinx Classic and hence devices. Range is 1 to 35. Default is 20. It is unlikely that
you will need to adjust this setting
Miscellaneous Settings
 SQL command timeout delay - default 120 seconds.
 Roll-up interval - specifies how often tags are refreshed from roll-up servers, default
60 minutes.
 OPC update rate - specifies how often the connection to OPC servers is refreshed.
 New meter data page - Enabled by default, selects the paged meter data display page
 New consumption calculation - provides more accurate consumption reporting in the
case of data logging anomalies such as unexpected zero values and resets.Enabled by
default.
 Fiscal Calendar Functionality - permits the creation and use of fiscal periods for
reporting. Disabled by default.
 On-demand tree loading - If on-demand tree loading is enabled, nodes are loaded only
when a user expands them. If disabled, the entire tree refreshes at a time.
 ClickOnce for ChartsPlus and RT - Enabled by default, sets up RT and ChartsPlus as
ClickOnce applications.
System Configuration Report
The system configuration report may be found on the System tab. This report can be
configured to document the configuration of any or all of the objects listed in the report
setup page. In addition, you may select all groups or an individual group / domain and its
subgroups. Groups are limited to those accessible to your login role.