Rockwell Automation 9307 FactoryTalk EnergyMetrix - Manual (Page 207)

9 • ReportsPlus
207
Report Run-time Options
Make the following selections from the Report Parameters list at report run time and click
View to generate and view the report.
Time Zone
Select the time zone in which you wish the report to run.
Start Date and End Date and Times
Select a predefined or custom report period. If fiscal calendar functionality is enabled,
predefined fiscal periods will appear in the list. Use the Pick links to graphically select the
dates.
Calculation Interval
Select Hours, Days (default) or Months from the pull-down menu.
Electrical Summary Report
The Electrical Summary report lists various electrical summary values for selected meters
for the selected date and time period. These summaries are:
 Total Energy kWh, kVARh and kVAh
 Average Demand for kW, kVAR and kVA
 Load Factor for kW and kVA
Min and Max values for kW, kVAR, kVA and Power Factor and the date/time they
occurred along with the coincident values for the other parameters.
The selected meters must be logging the relevant data in order for it to show up on the
report (for example, if Real Power Demand is not logged then there will be no kW figures
on the report). Power Factor is calculated from any two of the other three parameters (kW,
kVAR, kVA).
To set up an electrical summary report, navigate to the Reports tab in the navigation tree.
Select the Global Reports folder or a domain. When the screen refreshes, click the Add
button to set up a new report.
The Add a new report screen appears. Enter the report options into the data fields. When
you have completed entering the options, click the Save button to create the new report or
Cancel to abandon your changes.
Options
These are the options in the electrical summary report.
 Report Name
Enter a name for the new report.
 Report Template
Select Electrical Summary from the pull-down menu.