Rockwell Automation 9307 FactoryTalk EnergyMetrix - Manual (Page 174)

FactoryTalk EnergyMetrix Software
174
Logs Tab
This sets various options for the Allen-Bradley 1426 PowerMonitor 5000 unit trend log,
minimum/maximum log, and event log.
 Data, Trigger, and Energy Logging Interval
Defines the interval for the data and energy logs. If you check Sync to demand
interval, the values for minutes [and seconds] are ignored.
 Minutes. 0…60
 Seconds. 0…59
 Mode
This identifies whether logging stops or overwrites the oldest records and continues
logging when the log becomes full.
 Overwrite. This option continuously fills the log with updated records. When the
log becomes full, it overwrites the oldest records.
 Fill and Stop. This option fills the log and then holds those records and stops
updating until the log is cleared. You can clear the log manually in the RT Device
Viewer.
 Data Log and Trigger Log Parameters
Selects up to 32 parameters to record in the data log and up to eight parameters to
record in the trigger log. To change a selection, click on the row that you want to
change. Another window will pop up. Select a parameter and click OK or click Cancel
to abort making any change.