Rockwell Automation 9307 FactoryTalk EnergyMetrix - Manual (Page 168)

FactoryTalk EnergyMetrix Software
168
4. Change configuration data in any of the tabs, as appropriate, or upload the
configuration from the power monitor.
5. Click Download to download the new settings to the power monitor.
6. Click Close to close the Device Configuration window.
Details for the PowerMonitor 5000 RT device viewer are included in this user manual.
The RT device configuration windows for other Allen-Bradley power monitors are
similar. If you need more information, please refer to the online Help topics.
 General Tab
This identifies general information of an Allen-Bradley 1426 PowerMonitor 5000
unit.
 Options
 Manufacturer/Model
This is “Allen-Bradley 1426” for the Bulletin 1426 PowerMonitor 5000 unit.
 Firmware Revision
This lists the firmware revision of the power monitor Master Module.
 Unit Error Action
Defines the default action when there is a unit error: safe mode or firmware reset.
 Software Error Log Full Action
Defined the default action when there is a software error: safe mode.
To prevent downloading a default configuration to a previously-configured power
monitor, you should always upload first, then make any changes desired, then
download. Downloading is password protected. The password for each power
monitor is entered into the Device Setup screen, so you do not need to enter it each
time a download occurs.
Refer to the applicable product documentation for information
on setting up power monitors. Power monitors are shipped with
electronic documentation on a CD. Product documentation is
also available online in the Rockwell Automation Literature
library.
To configure an existing power monitor, select the power
monitor in the System tab, Devices folder, and click the Device
Configuration button on the Device Setup screen.