Rockwell Automation 9307 FactoryTalk EnergyMetrix - Manual (Page 182)

FactoryTalk EnergyMetrix Software
182
ControlLogix on (comm. type)
Connects to an Allen-Bradley ControlLogix (or Logix family) controller, such as
CompactLogix. With this device class FactoryTalk EnergyMetrix may log only PLC/
SLC mapped tags. You may log Logix family native tags using RSLinx Classic OPC.
 ControlNet
 Ethernet - EtherNet/IP
 Serial - DF1 full duplex
 DH+ - Data Highway Plus
PLC-5 on (comm. type)
Connects to an Allen-Bradley PLC-5 programmable controller. The following
communications are supported:
 ControlNet
 Ethernet - CSP/PCCC addressing
 Serial - DF1 full duplex
 DH+ - Data Highway Plus
MicroLogix on Ethernet
Connects to an Allen-Bradley MicroLogix controller 1000, 1100, 1200, 1400, 1500.
PowerMonitor II (model) on (comm. type)
Connects to an Allen-Bradley 1403 PowerMonitor II. Model LM specifies the limited
metering model. The following communications are supported:
 DeviceNet (RT option is not supported for DeviceNet)
 Ethernet - CSP/PCCC addressing
 Remote I/O - Must have a parent device such as a PLC-5, SLC 500 or
ControlLogix controller.
 Serial - Allen-Bradley DF1 half-duplex master/slave
Caution:
PowerMonitor on Remote I/O
Connects to an Allen-Bradley 1400 PowerMonitor. The only support communications
is Remote I/O. Must have a parent device such as an Allen-Bradley PLC-5, SLC 500
or ControlLogix controller.
Ethernet Energy Module (model) on Ethernet
Connects to an Allen-Bradley 1803-EEM controller designed for totalizing pulse and
analog legacy meters. The 1803-EEM is a legacy product which is no longer offered
for sale by Rockwell Automation. It comprises a programmable controller with pre-
engineered logic. The following models are supported in FactoryTalk EnergyMetrix:
Serial communications will not provide adequate performance in most cases. Please
contact Rockwell Automation technical support for more information.