Rockwell Automation 9307 FactoryTalk EnergyMetrix - Manual (Page 178)

FactoryTalk EnergyMetrix Software
178
Diagnostics Tab
This tab displays diagnostic information about the 1403 Powermonitor I unit, including
 Model
 Base and analog (if present) firmware revisions
 Serial number
 Date and time
Device Classes
FactoryTalk EnergyMetrix uses Device Classes to determine how to interact with a
particular device. The device class includes the device family, communications type and
whether the device has a clock that can be synchronized.
The following device classes are supported in FactoryTalk EnergyMetrix:
 PowerMonitor 5000 (model) on (comm. type)
Connects to an Allen-Bradley 1426 PowerMonitor 5000 unit. The following are
supported:
 Models
 M5 - basic power and energy metering
 M6 - basic power quality metering
 Communications types
 ControlNet
 DeviceNet
 EtherNet/IP
 PowerMonitor 1000 (model) on (comm. type)
Connects to an Allen-Bradley 1408 PowerMonitor 1000. The following are supported:
 Models
 TR1 - voltage/current transducer
 TR2 - power transducer
 EM1 - real energy submetering monitor
 EM2 - energy and demand monitor
 EM3 - full function power and energy monitor
 Communications types
 EtherNet/IP
 Serial - Allen-Bradley DF1 half or full duplex
 PowerMonitor 500 on EtherNet/IP
Connects to an Allen-Bradley PowerMonitor 500 model on EtherNet/IP (for data
logging only).
 PowerMonitor 500 on Modbus
Connects to an Allen-Bradley PowerMonitor 500 panel-mounted meter using the
Modbus RTU master driver integral to FactoryTalk EnergyMetrix. PowerMonitor 500