Rockwell Automation 9307 FactoryTalk EnergyMetrix - Manual (Page 176)

FactoryTalk EnergyMetrix Software
176
Configured the same as the start parameters above.
DST is disabled by default. When enabled, the default start time is 2:00 a.m. on the second
Sunday in March, and the default end time is 2:00 a.m. on the first Sunday in November.
TOU Tab
This tab lets you set up a custom time-of-use (TOU) profile in the Allen-Bradley
PowerMonitor 5000 unit for logging energy and demand into the TOU log.
 Off-peak days
Select days that are defined as off-peak. All usage and demand that occurs on selected
days is recorded in the off-peak field.
 Peak, mid-peak and off-peak hours
Select hours for each TOU category according to the TOU provisions of your energy
provider tariff. These selections apply only on days not selected as off-peak.
1404 PowerMonitor 3000 Diagnostics Tab
This tab displays diagnostics information about the 1404 PowerMonitor 3000 unit,
including:
 Model
 Base and analog (if present) firmware revisions
 Serial number
 Date and time