Rockwell Automation 9307 FactoryTalk EnergyMetrix - Manual (Page 180)

FactoryTalk EnergyMetrix Software
180
An important use for OPC meters is to log data from Allen-Bradley Logix family
controller native tags using the RSLinx Classic OPC server. To support OPC, RSLinx
Classic must be activated at the OEM level or higher, e.g., Professional, Gateway, etc.
FactoryTalk Live Data Server on Ethernet
Connects to the FactoryTalk Live Data Server (RSLinx Enterprise). The OPC
Browser may be used for setting up Devices, Meters and Meter tags.
FactoryTalk EnergyMetrix Server on Ethernet
Connects to a remote FactoryTalk EnergyMetrix server to obtain logged data as a
roll-up server. A roll-up server device is used to establish a connection to a remote
FactoryTalk EnergyMetrix server.
When roll-up meters and meter tags are configured, their data will be transferred from
the remote server at a rate defined in the web.config file. The default rate is once every
60 minutes.
More info...
Allen-Bradley Overload Relay and Motor Protection System products
Connects to the following products:
 825-P Modular Protection System on DeviceNet or EtherNet/IP
 E1 Plus Overload Relay on DeviceNet or EtherNet/IP
 E3, E3 Plus, E3 Plus EC5 Overload Relays on DeviceNet or EtherNet/IP
Allen-Bradley Soft Starter and Smart Motor Controllers
Connects to the following products:
 SMC Flex Low Voltage Soft Starter on DeviceNet or EtherNet/IP
 SMC-50 Solid State Soft Starter on DeviceNet or EtherNet/IP
Allen-Bradley Compact and Architecture Drives
Connects to the following products:
 PowerFlex 40 AC Drive on DeviceNet or EtherNet/IP
 PowerFlex 40P AC Drive on DeviceNet or EtherNet/IP
 PowerFlex 400 AC Drive on DeviceNet or EtherNet/IP
 PowerFlex 70 AC Drive on DeviceNet or EtherNet/IP
 PowerFlex 70EC AC Drive on DeviceNet or EtherNet/IP
 PowerFlex 700 AC Drive on DeviceNet or EtherNet/IP
 PowerFlex 700H AC Drive on DeviceNet or EtherNet/IP
 PowerFlex 700VC AC Drive on DeviceNet or EtherNet/IP
 PowerFlex 700S AC Drive on DeviceNet or EtherNet/IP
 PowerFlex 753 AC Drive on DeviceNet or EtherNet/IP
 PowerFlex 755 AC Drive on DeviceNet or EtherNet/IP
SLC 500 controller on (comm. type)
Connects to an Allen-Bradley SLC 500 programmable controller. The following
communications are supported:
 Ethernet - CSP/PCCC addressing