Rockwell Automation 9307 FactoryTalk EnergyMetrix - Manual (Page 297)

Appendix •
297
IEExec Operation of RT and ChartsPlus
You can optionally disable ClickOnce operation of these options and run them as Rich
Client applications in the IEExex.exe shell on your 32-bit Windows client computer.
If you operate these options in this way, make the following security settings on each
client computer:
1. Add the FactoryTalk EnergyMetrix server to the list of Trusted Sites.
To do this, follow these steps:
a. Select Tools > Internet Options from the Internet Explorer menu, and select the
Security tab.
b. Select Trusted Sites and click Sites.
c. Un-check the check box to require secure server verification
d. Add the FactoryTalk EnergyMetrix server's url to the trusted sites
5. Set the .NET Framework trusted sites security policy to Full Trust.
To do this, follow these steps:
a. Open a command window: click the Windows Start button, select ‘Run’, type
‘cmd’, and press Enter.
b. Copy the text below into the command window after the prompt.
"C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\caspol" -m -
chggroup Trusted_Zone FullTrust
c. Press Enter. When prompted, press Y and then press Enter.
d. When complete, close the command window: type ‘exit’ and press Enter.
More Information
There are a number of information sources that can help you install, configure, and use
FactoryTalk EnergyMetrix and develop your energy management strategy. FactoryTalk
EnergyMetrix ships with its User Manual included on the installation DVD as a pdf file.
These online Help topics provide the primary reference for setting up and using
FactoryTalk EnergyMetrix. Other resources are described below.
Your company's network security policies may not permit you to
set the security needed to use these options. If your security
policy prevents you from making these setting, please contact
your computer help desk or IT department for assistance.
Use ClickOnce to run RT and ChartsPlus on 64-bit clients.