Rockwell Automation 9307 FactoryTalk EnergyMetrix - Manual (Page 79)

4 • Set up Your System Architecture
79
The Add a Meter dialog box appears.
3. Select a Parent Group.
The default is the group selected when you began to configure the meter.
4. Select a meter Type from the pull-down menu.
5. Select a Device from the pull-down menu.
6. Enter a name for the new meter and any notes you wish to record.
7. Select a time zone for the meter.
A new meter is automatically configured to contribute 100% of its value to its parent
group.
8. To adjust the contribution factor, select the parent group and edit the Group Setup
screen
9. Click Save.
10. To add meter tags, click the Add a new meter tag link.